Baltoy 102/202 · Sword & Shield
Sword & Shield is a set in the Sword & Shield series. It was released on February 7, 2020. The printed size is 202. This checklist is longer, at 216 cards. Baltoy is 102/202, in position 102 of 216 on this checklist. Before it is 101 Baltoy, and after it is 103 Claydol. The listed rarity is Common.
Baltoy is a Basic Fighting Pokémon with 60 HP. In the Pokédex this is Baltoy (#343), generation 3 (Hoenn). The card lists Claydol, Claydol (#344) under evolves to.
Miki Tanaka illustrated this card. The same name is on 192 other cards in the catalog.
Baltoy (#343) has 26 other cards in the catalog. Those other cards are in 22 sets. The other printings with a release date run from 2003 to 2026. The earliest other card is Baltoy 32/100 in Sandstorm (2003). That card lists 50 HP, and this one lists 60 HP. The rarity there is Uncommon, and here it is Common. Midori Harada illustrated that card, and Miki Tanaka illustrated this one. 18 other cards of Baltoy list a different HP.
The attack Spinning Attack lists 20 damage. The cost is Fighting. Weakness is Grass ×2. Retreat cost is 1. The flavor text reads "It moves while spinning around on its single foot. Some Baltoy have been seen spinning on their heads." The regulation mark is D.
I keep a set binder for Sword & Shield, meant to hold every card of that set. This card is one slot in the Sword & Shield set binder. A generation binder holds one card of each species. Baltoy can fill a slot in Generation 3 binder (Hoenn). I still need this card.
Card facts
- Number
- 102/202
- Series
- Sword & Shield
- Released
- February 7, 2020
- Rarity
- Common
- Supertype
- Pokémon
- Subtypes
- Basic
- HP
- 60
- Type
- Fighting
- Illustrator
- Miki Tanaka
- Pokédex
- Baltoy (#343)
- Evolves to
- Claydol
- Weakness
- Grass ×2
- Retreat
- 1
- Regulation mark
- D
Attacks and card text
Flavor text
It moves while spinning around on its single foot. Some Baltoy have been seen spinning on their heads.
Binders this card belongs in
Other printings in the list
Next to it in the set
Questions about this card
Which set is Baltoy from?
Sword & Shield, in the Sword & Shield series. It was released on February 7, 2020. The printed size is 202.
What is the collector number?
102/202. It is entry 102 of 216 in this checklist.
Who illustrated it?
Miki Tanaka. The catalog lists 192 other cards with that illustrator.
What rarity is listed?
Common.
What Pokédex number does the card use?
Baltoy #343, generation 3 (Hoenn).
What regulation mark is printed?
D.
Which attacks are printed?
Spinning Attack (20).